Uv laser marking machine is the use of water cooling cooling method, need to be equipped with a water cooler, so the switch is very important, one step in the wrong order, may lead to machine damage or affect the life of the machine. Next, Foshan Fulan Laser for you to talk about the correct operation process of UV laser marking machine.
Boot: plug in; Main switch (pull up); (rotate) to lift the "emergency stop"; Press "Industrial control"; Turn on the chiller until the temperature reaches 25 degrees. Key (horizontal); Press "Laser"; Open the marking software.
Focus: Draw a graph of about one centimeter on the marking software. After general filling, place the coke aluminum piece in the place to be marked (see the laser or red light position with a piece of white paper), click "continuous processing" with the mouse, then click "marking", shake the Y-axis handle, move down and test for several times until you hear the clear sound and see the brightest light color, which is basically the focal length. (Adjust the focus and remember to cancel "continuous processing")
Marking: You can import the finished drawing, or you can directly type on the software. Click the marking software F2 or F2 on the keyboard or step on the foot switch to mark
Shutdown: turn off the computer (industrial control); Laser; Key (vertical); Turn off the main switch (pull down); Unplug; Keep the chiller on for about three minutes. After the compressor of the laser water cooling system stops, turn off the power supply of the chiller. After 5 minutes off, cover the lens